Athletes or people who have a severe case of flat feet would usually wear some custom made insoles with an arch support in order to be able to make up for their flat arch. Now although usually these special types of insoles are made by professional manufacturers, they can actually be made at home. One can make handmade orthotics if his case is not very severe like if he just has a low arch.
Now before one would want to make one of these things, he would first have to get hand of certain materials. Now the most important thing that he would need would be some insoles probably from other shoes that he does not use anymore. Just make sure that all sizes of these things are more or less the same or similar.
Once these soles have already been gotten, then the very next thing to do would be to get some glue. One is recommended to use super glue for this kind of project because super glue is very efficient and dries fast. However, if one does not have super glue in his house, then he may use some other sticky glue that is waterproof.
So the very first thing to do would be to get at least two soles together and put one on top of the other. As stated above, make sure that all the soles are exactly the same size. From there, try to find the area where the arch of the foot is held.
After determining the part that would hold the arch, then he now has to cut that part with the sharp scissors. Now he has to make sure that the part that was cut out is really able to fit the insole that is whole otherwise one would have to cut it a little bit more. Once he has already done that, then the next part would be to now glue that small part to the whole insole.
After that has already been done, then one just has to wait for the glue to dry before he tries it out. Of course as stated above, the best glue for this type of project would be super glue. It is this glue that is the stickiest as well as the most effective and it dries really fast.
Now if one would want to make his arch support taller than it already is, he can actually do so by adding another sole part to the insole. Now he has to get the third insole and just what he did a while ago. Once he has done that, he just once again has to let the glue dry and then try to walk with it.
Now if one is an athlete who needs a higher arch support or is a person who has a low arch, then he may actually make handmade orthotics at home to save money. Now if he has a very severe case of being flat footed, then it is best that he already buys a custom made one. Other than that, the handmade one is actually more than enough.
Now before one would want to make one of these things, he would first have to get hand of certain materials. Now the most important thing that he would need would be some insoles probably from other shoes that he does not use anymore. Just make sure that all sizes of these things are more or less the same or similar.
Once these soles have already been gotten, then the very next thing to do would be to get some glue. One is recommended to use super glue for this kind of project because super glue is very efficient and dries fast. However, if one does not have super glue in his house, then he may use some other sticky glue that is waterproof.
So the very first thing to do would be to get at least two soles together and put one on top of the other. As stated above, make sure that all the soles are exactly the same size. From there, try to find the area where the arch of the foot is held.
After determining the part that would hold the arch, then he now has to cut that part with the sharp scissors. Now he has to make sure that the part that was cut out is really able to fit the insole that is whole otherwise one would have to cut it a little bit more. Once he has already done that, then the next part would be to now glue that small part to the whole insole.
After that has already been done, then one just has to wait for the glue to dry before he tries it out. Of course as stated above, the best glue for this type of project would be super glue. It is this glue that is the stickiest as well as the most effective and it dries really fast.
Now if one would want to make his arch support taller than it already is, he can actually do so by adding another sole part to the insole. Now he has to get the third insole and just what he did a while ago. Once he has done that, he just once again has to let the glue dry and then try to walk with it.
Now if one is an athlete who needs a higher arch support or is a person who has a low arch, then he may actually make handmade orthotics at home to save money. Now if he has a very severe case of being flat footed, then it is best that he already buys a custom made one. Other than that, the handmade one is actually more than enough.
About the Author:
You can visit www.customorthoticfootbeds.com for more helpful information about Making A Pair Of Handmade Orthotics.
0 comments:
Post a Comment